Do you have room that might utilize a ceiling fan Adding a ceiling fan on your own is relatively easy, if you are basically replacing a light fixture that is already in the appropriate location. Most of the wiring will already be available, so the only obstacle will be replacing the pre-existing workbox with one that is accepted for the weight of a ceiling fan. It can be very dangerous if you do not swap your current workbox to something that can take on the added weight of the ceiling fan. Just before you carry out anything, read the manuals for your fan very cautiously and make certain you have the essential tools.

If you plan to setup the fan on a cathedral type ceiling, then you may need to have parts to boost the fan lower. Whenever you have all the stuff all set, the first thing you should do is make sure that the breaker is off so no power goes to the light fixture. woodworking plans Take out the light fixture, and decide if the workbox that is already there can handle the additional weight. Generally they aren't made for a ceiling fan, so you will want to include additional support. This can be done rather effortlessly if you have access to the attic, and are in position to get to the spot of the new fan.

To add new support, you merely nail a 2x4 in between the ceiling rafters so that it touches the top of the workbox. Check the 2x4 is attached in its place, and then bolt the box to the wood. If you accomplish it correctly, the fan should be properly supported by the 2x4. If you do not have gain access to to the attic, you will have to mount metal cross bracing using the hole in your ceiling. Carrying out this is far more of a challenge and may not be as secure as using a 2x4 but it is the best you can do if you dont get access to the attic.

So now, after assembling the fan according to the instructions, you are ready to put your new fan. The challenge is to hold onto the fan while attaching the wiring. The problem is based on the kind of fan you get, whether it is a draping frame or a fan that has a bracket with a J hook. Most fans, you will find a wall mount switch along with a chain to control the speed of the fan beginner woodworking. If you also set up a light kit with the fan, the two can be monitored by a wall switch or chain.

Cabling the fan is simply by connecting two black wires, two ground wires and two white wires. Once you have finished putting together the fan and cabling, the last step is to install the fan blades. Right after you install the blades, the only thing left is to flip the breaker back on to see if you did it right.